Extreme Home Arcades Classic series Operation Manual Download Page 59 | Manualshive

Page: 59 / 86

background image

2.

American Laser Disc Games

can be played with both the Trackball and upper trackball buttons

or Player 1's light gun. We've update the cfg files to allow both now but your system may only be
setup to allow trackball play... Credit button is mapped to the 7th button on Player 1. We've recently
also mapped it to your normal credit button or combination (player 1's start + player 1's first button)
Config files attached...

Unrar the files to the D:\Arcade\American Laser Disc Games\ directory to

add light gun support.

3.

If Hyperspin becomes unresponsive (see also page 7 of manual - "Menu Functions"):

Push and HOLD player 1’s 2nd Player 1’s Start Button, Then Push Right On Player 1’s

Joystick to “Refocus” HyperSpins Main Screen (this sends an ALT+TAB command to the system to

switch focused Windows)

If this doesn’t work try moving the trackball in a circle and pushing the upper left Trackball Button to

“Refocus” the HyperSpin Screen…

4.

Dead or Alive 5

Plays With Both the Normal Arcade Controls and now with the wireless analog controllers, make sure

they are on BEFORE loading the game.

5.

Zork and other Keyboard based games require a full USB keyboard,

any model will do, the easiest are the

wireless modern versions... I have some mini USB keyboards with touch pads here at the shop that work awesome, cost
$30 + $5 shipping, let me know if you'd like one. They are plug and play.

6.

Astro Blaster

has great synthesized sound but the game sounds are missing. We've fixed this with a simple file

addition... If you have a flash drive we can email you the file to transfer to your system.

7.

Sound and gameplay are a bit slow at times on Gauntlet Legends, Dark Legacy and the Cruisin Series (world,

USA

) but mainly at load screens. This is a software "bottleneck" due to the multiple processors used on these original

board sets in the original machines, emulation will improve with time but we are aware of these slow downs.

8. We can transfer your memory card data from any game system to our machines the BIG problem of course is getting
the data off your original system... There are USB adapters that can make this possible but we have yet to test them...

9.

Deal or No Deal

has been fixed thanks to your heads up on the No-CD Thing... Link to fix file is here, copy and paste

into the

D:\Arcade\New Secret PC Games\Deal or No Deal\ Directory overwriting the original exe file.

59 |

P a g e

«
...
57
58
59
60
61
...
»

Summary of Contents for Classic series























































































Reviews:

No comments

Related manuals for Classic series

Brand: Parkeon Pages: 127

Brand: Stihl Pages: 96

Brand: Panda Vending Pages: 4

Brand: Jennison Entertainment Technologies Pages: 41

Brand: Hefter Systemform Pages: 80

NICKTOONS nitro

Brand: BMI Gaming Pages: 54

International L

Brand: Wurlitzer Pages: 88

Brand: Ryobi Pages: 28

Brand: Martin Yale Pages: 4

Brand: Martin Yale Pages: 7

Brand: Martin Yale Pages: 8

Brand: Martin Yale Pages: 8

my OFFICE PRODUCTS P6500

Brand: Martin Yale Pages: 12

papermonster F200

Brand: Martin Yale Pages: 25

Arcadepro Neptune

Brand: Home Leisure Direct Pages: 7

Seaway Submarine

Brand: UNIS Pages: 30

Brand: Team Play Pages: 3

Brand: Jersey Jack Pinball Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands