Extreme Home Arcades Classic series, Operation Manual

Page: 48 / 86

8) Repeat steps 5 and 6 for the Lightgun Y Analog input, using a VERTICAL movement instead
of horizontal.
9) If you have two AimTrak Light Guns installed, repeat steps 4 through 9 above with your
second Light Gun, selecting Player 2 Controls instead in step 4.
10) Move the menu up to P1 Button 1. This should be assigned by default as 3 different
functions: CTRL or Mouse X button 1 or Gun X Button 0.
The AimTrak Light Gun trigger will be seen by MAME as “Gun X Button 0”, but it may
not be “Gun 1 Button 0” as in the default.
Clear the Function and Press Player 1’s button 1, then clear again WITHOUT MOVING
OFF THIS FUNCTION and press the upper LEFT Trackball Button, then clear again
WITHOUT MOVING OFF THIS FUNCTION and WITHOUT aiming the gun at the screen
just pull the trigger.
11) Press the Enter key to select P1 Button 2 next and do the same as STEP 10 BUT moving
on to the Player 1’s Button 2, then clear and Press Middle Upper Trackball Button, then clear
and press one of the GUNS AUX Buttons.
12) Do the same for P1 Button 3, but again using Player 1’s 3
rd
button, clear it, then upper
RIGHT trackball button, then 2
nd
AUX Button on the Gun.
13) If you have a 2
nd
Gun you can set it up by going into Player
2’s Controls (Input General) and following the instructions from
STEP 5 through STEP 12
48 | P a g e