Extreme Home Arcades Classic series Operation Manual Download Page 11 | Manualshive

Page: 11 / 86

background image

Boot Up

When You turn the machine on for the first time you will notice a few things as the Dream Machine boots up.

For about 20 seconds you will see our operating system logo followed the “Desktop” with our contact info and logo’s.

Our colorful Hyperspin intro movie begins... (Random intro video chosen from over 100+ intro videos that change each time
the machine is turned on…

You can skip this intro video to go directly to the main menu screen by pressing any joystick or button on the control panel
(note: this will bring up the menu but it may be sluggish as background drivers are still loading…)

After the into movie plays you will be presented with the main game menu screen that looks something like this:

On the right side you will the various emulation systems (MAME, Lynx, MUGEN, Nintendo, etc)

To select an emulation system just press 1 or 2 player start

On the left is a static screen shot or movie depending on system and game selected showing what the game looks like after it is
loaded.

To select the game you can press either 1 or 2 player start and it will load up, some games take longer than other but the
overall load time is between 1 second to 2 minutes (MUGEN)

To EXIT from any game you can push and hold player 1 START (button with
1 man on it) button and then push player 2’s start button (button with 2 men
on it)

11 |

P a g e

«
...
9
10
11
12
13
...
»

Summary of Contents for Classic series























































































Reviews:

No comments

Related manuals for Classic series

THERM-O-FLOW T7 Series

Brand: Graco Pages: 50

Brand: GLD Products Pages: 22

Brand: LAVAZZA Pages: 27

Brand: Icegame Pages: 38

Brand: Sanden Pages: 41

Brand: SandenVendo Pages: 18

XR FLEX VOLT DCS690

Brand: DeWalt Pages: 59

Brand: Vendo Pages: 44

Ocean King 3 Jackpot Bonus Revenge Fishing Game Machine

Brand: HomingGame Pages: 6

Brand: Formax Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands