31.
Locate the 2 axles, 2 locking nuts, 2 wheels, 4 wheel collars and 2 wheel pants. Place
one wheel collar on the axel then slide the wheel onto the axel and secure the well
with the second wheel collar. Place the threaded portion of the axle through the hole
in the landing gear and attach the lock nut and washer onto the axle. Slide the wheel
pant into position over the axle and tighten the nut, making sure the wheel pant is
positioned properly.
32.
When satisfied with the position of the wheel pant, drill a 1/16
th
hole through the
wheel pant at the location of the hole in the landing gear and secure with a wood
screw. Repeat this process for the remaining wheel pant.
25
