18.
Use the recommend 1.50” SWB servo arms and attach 2 ball links onto the titanium
turnbuckle pushrod. Secure the pushrod to the control horns and servo arm using
the supplied 3mm bolts, washers, and nylon insert locknuts as shown in the picture
below. As always, use blue Loctite on ALL bolts!
19.
Use a soldering iron or a sharp #11 blade to remove the covering from the blind nuts
on the wing tip. This is for attaching the SFG’s or Racing Tips.
Note: Repeat this process for the other wing. Clean the wings with Windex and set
them aside.
18
