Attach a 12” Extension onto the elevator servo and install the servo as shown. Assemble the longest
pushrod in your kit with the ball link and control horn as shown. Use thick CA to lock the nut on the
control horn. DO NOT GLUE INTO THE ELEVATOR YET.
On 3D planes, it is very important to have 45 degrees of elevator throw on high-rates setting. We
recommend that you check to make sure you have 45 degrees of throw up and down, by inserting the
horn into the elevator WITHOUT GLUE and hooking up your pushrod and servo and operating your radio.
Turn the endpoint adjustment up on your transmitter to maximum, and check the amount of elevator
throw you have. If you need help measuring 45 degrees, fold a piece of paper as shown and use it to
measure the throw.
22
