Trial fit the other side elevator half, make sure the elevators are straight and level to each other. A slight
misalignment of elevator halves will not affect flight performance, but you can make sure that your
elevators will be perfectly aligned by taking a bit of time to align them now. Sand the slot in the elevator if
necessary to align elevators. Make sure the elevators can swing easily 45 degrees up and 45 degrees
down.
Once you are satisfied with the alignment of the elevators, apply medium or thick CA glue into the slot in
the elevator as shown, and install onto the stabilizer with thin CA.
Install your brushless motor onto the firewall as shown. If you use the recommended Omega130g870
motor, you can install the motor directly onto the pre-installed nuts in the firewall with no spacers. Hacker
A30L and Torque 2814-820 motors install the same way. If you use a shorter motor, plastic spacers are
included in your kit.
19
