7
6. Assemble the aileron linkage as shown and secure to the aileron horn assembly
and servo arm with the provided 3mm bolts. Apply blue Loctite to all bolts!
7. Repeat this process for the other wing, then inspect them both for taut covering
and any lifting seams that need attention with a hot iron or heat gun. Give a good tug
on the aileron to make sure all is secure, then clean the wings with a soft cloth and
Windex and set aside.
Fuselage Assembly
8. Locate the carbon fiber landing gear and mounting bolt set in the hardware bag.
Insert each bolt into a washer, through the carbon gear and fuselage and secure with
a nylon insert locknut.
