18
27. Once satisfied with the motor/esc installation and proper direction of rotation has
been confirmed, install the cowl by sliding it up onto the lower retaining hooks and
securing with 2 3mm bolts installed through the holes in the F1 former and into the
blind nuts in the cowl. Be sure to put a drop of blue Loctite on the bolts.
28. Attach a 24” servo extension to the elevator servo and secure with EF servo clips
or heat shrink tubing. Use the hardware provided with the servos to install the
elevator servo on the left side of the fuse with the output shaft toward the front of the
aircraft. Assemble the elevator linkage as shown using the provided 3mm hardware
and a 1.5" servo arm.
