Extraflame SHARON PLUS, User Manual

Page: 24 / 40

24 ENGLISH
FrOnt aIr
This menu allows the upper ventilation motor speed to be set.
Range: (AuTo, coMFoRT, oFF).
If comfort mode is selected, the upper air speed is reduced. If off mode is selected, the upper air is turned off.
To set: OK >FrONT aIr>SeT
easy set-Up
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering
pellet quality. By using the eASY SeT-up function, it is possible to change the calibration of the volumetric weight by increasing or decreasing
the preset values.
In the stove program, the available values range from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value, which
is 0.
If you notice an excessive deposit on the burn pot, access the eASY SeT-up program and lower the value by one unit to “- 1”; then wait until
the next day and if there is no improvement, decrease again, to a maximum of “- 3”. Instead, if it is necessary to increase the calibration of the
volumetric weight of the pellet, change the factory value from “0” to “+ 1, + 2, + 3” as required.
To set: OK > eaSy SeT-Up
EXcESSiVE PELLEt DEPoSit in BuRn Pot noRMaL oPERation MiniMuM PELLEt DEPoSit in BuRn Pot
-3 -2 -1 0 +1 +2 +3
THIRd decReASe
RAnge IF THe
FIRST TWo ARe
InSuFFIcIenT
Second
decReASe
RAnge IF
THe FIRST IS
InSuFFIcIenT
FIRST decReASe
RAnge (TeST FoR
1 dAY)
opTIMAl FAcToRY
vAlue
FIRST IncReASe
RAnge
Second
IncReASe RAnge
IF THe FIRST IS
InSuFFIcIenT
THIRd IncReASe
RAnge IF THe
FIRST TWo ARe
InSuFFIcIenT
n.B.: iF tHESE aDJuStMEntS Do not SoLVE tHE PRoBLEM oF PELLEt DEPoSitS in tHE BuRn Pot, PLEaSE contact youR LocaL
SERVicE cEntRE.
aIr ZOne cOntrOl
This menu allows you to enable the AIR Zone conTRol mode
Range: (on, oFF)
If on is selected, the stove will optimise the adjustment so that the heat is sent to the ducting when the main room temperature set is
reached.
To set: OK > aIr ZONe CONTrOL > SeT
aIr dUctInG
This menu allows you to set the ducting motor speed. Range: (AuTo, coMFoRT, oFF).
If coMFoRT mode is selected, the ducting speed is reduced. If off mode is selected, the ducting is turned off.
To set: OK >aIr DUCTINg>SeT
mOdes
This menu allows you to set the machine operation logic. Range: (AuToMATIc, SelF conTRol)
If AuToMATIc mode is selected, the stove power will be automatically adjusted to reach the set temperature without exceeding it.
this function improves the experience of using the generator in terms of consumption, thermal and acoustic comfort and the
reduction in the need for cleaning and maintenance.
If SelF conTRol mode is selected, the stove will heat the room to the set temperature whilst maintaining the power set by the user.
To set: OK > mODe > SeT