background image

26

ENGLISH

FIrst load

This function allows the auger to be filled, thus facilitating first stove ignition phases, or in the event the pellet hopper is empty. with the 
stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FirsT LOaD function, confirming by 
pressing OK.

To stop the continuous loading, simply press 1 for 3 seconds.

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

press key 3 until seTTiNgs appears and confirm by pressing key 6.

 

Š

Keep pressing key 3 until FirsT LOaD appears and confirm by pressing key 6.

 

Š

Use keys 4-5 to enable "ON" / disable "OFF"

 

Š

Press key 1 several times to confirm and exit the menu.

reset

allows the user to reset all editable values to the default values.

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

Press key 3 until seTTiNgs appears and confirm by pressing key 6.

 

Š

Keep pressing 3 until reseT appears and confirm by pressing 6.

 

Š

Use keys 4-5 to enable "ON" / disable "OFF"

 

Š

Press key 1 several times to confirm and exit the menu.

delta-t

This function allows the hysteresis thresholds to be set for stove ignition (DeLTa-T ON) and switch-off (DeLTa-T OFF), used as a room 
temperature adjustment interval if not managed by an external thermostat

.

The possible values for 

DELTA-T 

go from: 

0.5 - 5°C

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

Press key 3 until seTTiNgs appears and confirm by pressing key 6

 

Š

Press key 3 until DeLTa-T appears and confirm by pressing key 6.

 

Š

Use keys 4-5 to set the desired value.

 

Š

Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.

CleanInG

This function allows to open the burn pot base, facilitating the combustion chamber cleaning operations.
with the stove cold and switched "OFF", activate the CLeaNiNg function.
Once the burn pot bottom has been opened completely, scrape the walls of the combustion chamber using the special tool supplied and let 
the residual ash drop into the ash drawer. 

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

press key 3 until seTTiNgs appears and confirm by pressing key 6.

 

Š

Keep pressing 3 until CLeaNiNg appears and confirm by pressing 6.

 

Š

Use keys 4-5 to enable "ON" / disable "OFF"

 

Š

Press key 1 several times to confirm and exit the menu.

Once the cleaning operation has been completed, close the fire door and press the key 1 for 3 seconds to finish and wait for the main screen 
to reappear.

OPEN THE DOOR ONLY WHEN THE OPERATION IS COMPLETE! THE DISPLAY WILL INDICATE THAT THE DOOR HAS BEEN OPENED!

Summary of Contents for NORIS









































Reviews: