Extraflame GLENDA WIFI, User Manual

Page: 26 / 32

ENGLISH
Displays
Display Reason solution
off
Stove off -
staRt
The start phase is in progress -
pellet feeDing
Pellet feeding during the ignition phase is in progress
ignition
The ignition phase is in progress -
staRt-up
The start phase is in progress -
WoRk
The normal work phase is in progress -
MoDulation
The stove is modulating -
BuRn pot Cleaning
The automatic burn pot cleaning is in
progress.
The automatic burn pot cleaning (not in 1st power) is performed
at pre-established intervals of continued working.
auto-Cleaning
The automatic burn pot cleaning is in progress caused by the temperature in the chamber.
final Cleaning
When the stove is switched-off, final cleaning is in progress. The final cleaning phase lasts about 10
minutes.
stanD By
Stove off due to temperature reached
and in stand-by for re-ignition.
To deactivate the STAND-BY function see the specific chapter.
ext stanD By
Stove off due to an external
thermostat, in stand-by for re-ignition To deactivate the STAND-BY function see the specific chapter.
Cooling stanD-By
A new ignition is attempted when
the stove has just been switched-off
When the stove switches off, it is necessary to wait until complete
fumes motor switch off and then clean the burn pot.
The stove can only be re-ignited when these operations have
been performed.
Cooling stDBy -
BlaCk out
The stove is cooling due to black out On completion of the cooling phase, it will re-ignite automatically.
stanD-By
Re-ignition
The stove is in stand-by for re-ignition.
loW
Room thermostat set at minimum
value.
In this mode the stove only works at 1st power independently
from the power set. To exit this function just raise the room
temperature using button 4 and then key 2.
Hot
Room thermostat set at maximum
value.
The stove works at the set speed, without ever modulating. To exit
this function just lower the set temperature using button 4 and
then key 1.
Close
tank - DooR
Pellet tank open.
Door open.
Air vent clogged or dirty.
Check the correct closure of the door and pellet tank.
Check air vent.
26