Extraflame GLENDA WIFI, User Manual

Page: 18 / 32

ENGLISH
stanD By
stanD - By with DiGital thermostat (stanDarD)
sTBy FUNCTiON seT aT ON
if the sTBy function is active (ON), when the stove reaches the room temperature and exceeds the set value plus DelTa T OFF, it will switch off
after a default delay time, displaying sTaND-By.
When the room temperature is below the setting less DelTa T OFF, it will start to work again at the set power displaying work.
J
usinG the key loCk aFter aCtivation:
to loCk the keyBoarD, press keys 1 anD 5 at the same time until the FollowinG appears: "keys
loCkeD"
to unloCk the keyBoarD, press keys 1 anD 5 at the same time until the FollowinG appears: "keys
unloCkeD"
BRIGhTNEss
This menu allows the user to adjust the brightness of the display. The possible settings range from OFF - 10 to 31.
activating OFF, the back light of the display will go off after a preset delay.
The back light will go on as soon as a key is pressed or if an alarm should be triggered in the machine.
CONTrOls prOCeDUre
Š press key 6.
Š proceed by pressing key 2 until settings is displayed.
Š
Confirm using key 6.
Š
press key 2 until display is shown and use key 6 to confirm.
Š
press key 2 until brightness appears and confirm with key 6.
Š Use keys 4-5 to set the brightness.
Š
press key 1 several times to confirm and exit the menu.
OFF
1
2
3
4 6
5
OFF
1 2
3
4 6
5
key loCk
The menu allows the user to lock the display keys (like with mobile phones).
CONTrOls prOCeDUre
Š
press key 6.
Š proceed by pressing key 2 until settings is displayed.
Š
Confirm using key 6.
Š
press key 2 until Display is shown.
Š
Confirm using key 6.
Š key lock will appear - confirm with key 6.
Š
Use keys 4-5 to enable ON/ disable OFF.
Š
press key 1 several times to confirm and exit the menu.
settinGs
set CloCk
aDjustinG lanGuaGe
Š
see chapter: commissioning settings
Display
The "Display" menu contains two sub-menus:
Š
key lOCk
Š
BrigHTNess.
18