FALO’ 1XLP
During the assembly of the covering, it is necessary to follow the numbering born on the rear of each tile
as described in the following instruction booklet.
ASSEMBLY INSTRUCTIONS
INSTALLATION SMOKE EXTRACTION FLUE
For the series FALO’, 2 systems of smoke extraction have been foreseen allowing adapting the purchased
product to the customer’s needs. The foreseen systems are the following:
a. Rear
extraction
b.
Upper extraction (with the help of the additional kit)
The fi gure here below shows the 2 possible ways of installation.
Rear safety grate.
In case of upper installation, it is necessary to
rotate the grate of 180° to cover
the back hole.
Step 1
Place the stove body on the metal frame tightening it with the
screws located on the rear side of the structure. Place FALO’ in
the previously established position and avoid further shifts that
may lead to the break of the majolica elements.
Verify that the distances for the following connection of the
piping for smoke discharge and air intake are correct.
ENGLISH
