ELISIR UTENTE PARAMETERS (BOARD 002272575)
28
Chapter 1
ELISIR UTENTE PARAMETERS (BOARD 002272575)
There are diff erent menus allowing to customise the functioning of the product depending on ones’ own
requirements. The menu is structured as follows:
SET CLOCK
This section allows to adjust the current DAY CLOCK and time.
Controls procedure
Hold down button 5 until “
1.
SET CLOCK
“ appears on display D1.
Press button 5 to access the menu.
2.
The following operations can be carried out from the menu:
3.
Adjust the selected value using buttons 2 and 3.
Using button 5 confirm and proceed to the following parameter.
Using button 4 return to the previous parameter.
Using button 1 confirm and return to the higher menu.
Menu
View display D1
Description
View display D2
Sliding text
Value
SET CLOCK
DAY
MON - SUN
Current week day
Power
TIME
00 - 23
Current time
Power
MINUTES CLOCK
00 - 59
Current MINUTES CLOCK
Power
DAY CLOCK
00 - 31
Current MONTH CLOCK day
Power
MONTH CLOCK
01 - 12
Current MONTH CLOCK
Power
YEAR CLOCK
00 - 99
Current YEAR CLOCK
Power
It is necessary to remember to adjust at least the fi rst 3 parameters (day, TIME CLOCK and
MINUTES CLOCK) to be able to correctly use the chrono automatic function in that the
programmed ignitions and switch-off s will be adjusted by these parameters.
SET CLOCK
DAY
TIME CLOCK
MINUTES CLOCK
DAY CLOCK
MONTH CLOCK
YEAR CLOCK
SET CHRONO
(see following table)
SET LANGUAGE
language
REG. UTENTE
display
PELLET
V1-ARIA
stand-by
keys frozen
v2 - air
SET TECHNIC
reserved technician
