Extraflame Comfort Plus, User Manual

Page: 19 / 48

19
COMFORT PLUS INSTALLATION
Chapter 4
The air vent must be made outside the fl ue as it must not suck heated air.
Fix the base using the locking screws.
Connect the conveyor pipe correctly to the piping for fl ue evacuation, the air vent box to the relative intake
pipe and the conveyor to the ducting piping.
Re-position the machine body by repeating the operations carried out previously in the reverse order.
Finally, use the Allen wrench to turn the lockbolt anti-clockwise to block movement.
To understand whether the insert is correctly attached to the base, connect the plug to the socket: the
display should switch on.
The lower grill of the insert must lie at least 1 cm above the fi re surface in covering
marble.
PEDESTAL ASSEMBLY (OPTIONAL)
Component description:
Comfort Plus
™
Height-adjustable pedestal
™
Lateral feed hopper
™
Adjustable hopper support
™
This type of installation can be used when there is no
base onto which the insert can be rested.
Proceed by positioning the base in the desired point
and use the feet to adjust the height (the bolts are
positioned in the four external sides of the pedestal in
the lower part).
Check the presence of a current socket on the rear of the
insert so that the socket is accessible once installation is
completed.
After having evaluated the correct position, the machine
body must be detached in order to fi x the sliding base:
Use the supplied Allen wrench to turn the lockbolt
™
clockwise.
Extract the insert
™
Tilt it to release it from the rails.
™
Fix the pedestal to the fl oor using strong steel plugs
with a diameter of 8 mm.
Fix the base tot he frame using bolts.
Make a hole measuring 60 mm in correspondence with
the air intake.
fi gure 4.4