79
78
EN
EN
CONTACT DETAILS FOR NEW ZEALAND
Distributor
: Madal Bal NZ, 57 Grey Street, Onehunga, Auckland, New Zealand 1061
E-mail: [email protected]
ES Declaration of Conformity
Subject of declaration - model, product identification:
Extol® Premium 8891824
Cordless jig saw, SHARE 20 V, variant with a battery and a charger
Extol® Premium 8891825
Cordless jig saw, SHARE 20 V, variant without a battery and without a charger
Manufacturer Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
hereby declares
that the product described above is in conformity with all relevant stipulations
of harmonisation legal regulations of the European Union:
(EU) 2011/65; (EU) 2014/30; 2006/42 ES.
This declaration is issued under the exclusive responsibility of the manufacturer.
Harmonisation norms (including their amendments, if any exist), which
were used in the assessment of conformity and on the basis of which the Declaration of conformity is issued:
EN 62841-1:2015, EN 62841-2-11:2016, EN 55014-1:2017;
EN 55014-2:2015; EN IEC 63000:2018;
The technical documentation 2006/42 ES was drawn up by Martin Šenkýř at the business address of
Madal Bal, a.s., Průmyslová zóna Příluky 244, 760 01 Zlín, Czech Republic.
The technical documentation (2006/42 ES) is available at the aforementioned business address of Madal Bal a.s.
Place and date of issue of ES Declaration of Conformity
: Zlín 30.12.2020
On behalf of Madal Bal, a.s.
Martin Šenkýř
Member of the Company‘s Board of Directors
Note regarding table 5:
The meaning of other pictograms that are identical to
the pictograms shown on the cordless power tool are
explained in table 6.
MEANINGS OF THE MARKINGS
ON THE LABEL OF THE CORDLESS POWER TOOL
Read the user's manual before using
the power tool.
It meets the respective EU harmoni-
sation legal directives.
Do not throw the electrical equi-
pment at the end of its lifetime
out with household waste, see
subsequent paragraph about waste
disposal.
Year of manu-
facture
and serial
number (SN:)
The rating label of the power tool
includes the year and month of
manufacture of the power tool and
its serial production number.
Table 6
Note regarding table 6
The meaning of the pictograms provided on the label of
the cordless power tool is provided in the text of the user‘s
manual.
XII. Storage
y
Store the power tool in a safe, dry location that is out
of reach of children and protect it against mechanical
damage, direct sunlight, radiant heat sources, frost,
high humidity and ingression of water. Prior to storing
the power tool, take the battery out of it because
a battery that is inserted inside the power tool is sub-
ject to a faster self-discharge effect.
y
Protect the battery against rain, frost, high humidity,
temperatures above 50°C, against mechanical damage
(e.g. being dropped) and never open or burn it.
Store the battery fully charged and to ensure the
longest possible lifetime fully charge it after several
months (no later than after 6 months). Keep the battery
and the charger out of children‘s reach.
y
The battery capacity is significantly reduced in
freezing and high ambient temperatures and it is
also damaged by these temperatures.
y
Protect the battery contacts against soiling, deforma-
tion or other damage and prevent conductive bridging
of the battery contacts by taping over the connectors,
e.g. using plastic tape, to prevent the battery from
short-circuiting, which could result in a subsequent fire
or explosion.
y
Ensure that children do not play with the battery or
the saw.
XIII. Waste disposal
y
Throw packaging into the appropriate sorted waste
container.
y
The power tool and charger are deemed as
electrical equipment that must not be thrown
out with household waste, but rather accor-
ding to the European Directive (EU) 2012/19, they must
be handed over for ecological disposal/recycling at an
appropriate electrical waste collection point because
they contain substances that are hazardous to the envi-
ronment.
y
Prior to handing over the cordless power tool
for disposal, the battery must be removed,
which, likewise, must not be thrown out with
household waste (directive 2006/66 ES), but
rather must be handed over separately for ecological
disposal at a battery collection point because it contains
substances that are hazardous to the environment. You
will receive information about electrical equipment
collection points at your local town council office.
