46
47
EN
EN
USiNg THE DEviCE
wiTH LEvELLiNg AUTomATiCS
Thanks to the self-levelling automatics, the device is intended for determining and checking the horizon-
tal plane or horizontal lines and the vertical line. After settling, the device will automatically determine
the horizontal and/or vertical line. When the position of the device is outside the self-levelling range of
the device, the laser line will flash and self-levelling will not be possible.
USiNg THE DEviCE
wiTHoUT LEvELLiNg
AUTomATiCS
When the self-levelling mechanism of the device
is locked, the device can be tilted to an angle
outside the self-levelling range for the purpose of
projecting a laser line in situations where a certain
tilt angle needs to be maintained as shown in the
example in fig. 1.
Fig. 1
introduction
EN
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regula-
tions of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.cz [email protected]
Tel.: +420 577 599 777
Manufacturer
: Madal Bal a. s., Průmyslová zóna Příluky 244, 760 01 Zlín, Czech Republic
Date of issue
: 28. 1. 2020
i. Description – purpose of use
The self-levelling cross line laser
green 360°+ 1V
projects
a single horizontal plane in a 360° radius (entire
plane) and a single vertical line,
which is perpendicular
to the projected horizontal plane and forms a cross at the
point of intersection. The device enables the projection of a horizontal
plane and/or vertical line.
