47
46
EN
EN
II. Technical specifications
Order number
43122
Power input
10 W
Light source
Non-replaceable LED
Input voltage
8,4 V DC
Lighting time at full 10 W power output
1)
2 hours
Protection marking of the floodlight (IP)
2)
IP 65
Dimensions with handle and stand (W×H×D) cm
14,5 × 25 × 16,5
Weight with handle and stand
0,8 kg
Floodlight dimensions (W×H×D) cm
14 × 8,5 × 11,5
Weight of floodlight
0,4 kg
Battery
Type of battery
Li-ion
"Constant current" function
1)
Yes
230 V~50 Hz power adapter
Input voltage/frequency
120-240 V~50/60 Hz
Output voltage/current
8,4 V/1000 mA DC
Battery charging time with the 230 V power adapter
2 hours
Insulation class
II
12 V (DC) power adapter
Input voltage
12-24 V DC
Output voltage/current
8,4 V/300 mA
Battery charging time with the 12 V power adapter
5-6 hours
1)
This is the battery‘s „Constant current“ feature. With this feature, the battery supplies the floodlight
with the same amount of current for a period of 2 hours to provide maximum 10 W lighting output
without a drop in light intensity, thereafter it turns off.
The lighting and charging time depend on the degree to which the battery is worn out. When the battery wears out,
the lighting time decreases while charging time increases. This is normal.
2)
The IP 65 protection on the floodlight protects it from rain, snow and dust. This does not apply to the floodlight‘s
power adapter / charger, see below.
Information regarding halogen LED floodlight ecodesign according to European Commission Directive (EU)
1194/2012.
Table 1
FLOODLIGHT‘S LI-ION BATTERY:
y
provides the floodlight with Constant current for a period of 2 hours, thereby delivering max. light output during this
time without light intensity decline and then it turns off, this battery function is called „Constant current“.
y
to enable longer non-stop lighting when no charging is possible, it can be charged even even when not fully discharged.
y
minimum self-discharge over time makes it possible to use the floodlight without recharging even when it has not
been charged for an extended period of time.
After removing the handle and stand, the floodlight can be screwed on to a fixed base and used as a light source
mounted at the lighting height of the area with a standard 230 V power socket connection using the supplied power
cord with a standard power plug.
The floodlight is resistant against rain and is dust proof.
Fig.2, floodlight for mounting to a fixed base with a remo-
vable power cord for connection to a 230 V socket.
