![Extel VPMN 252 Installation And Operation Manual Download Page 14](http://html1.mh-extra.com/html/extel/vpmn-252/vpmn-252_installation-and-operation-manual_2453985014.webp)
13
De polariteit tussen het scherm en de buitencamera in acht nemen.
(geen enkele verplichte polariteit voor de bediening van de deuropeners).
•Klem “6”
van het scherm op klem
“6”
van de camera.
•Klem “7”
van het scherm op klem
“7”
van de camera.
o
pgelet
:
de
draden
in
geen
geval
verdubbelen
oM
de
doorsnede
te
vergroten
.
Zu verwendende Drähte: • Bis 25 m Verdrahtungslänge: 2x Drähte 6/10 mm
• Bis 100 m Verdrahtungslänge: 2x Drähte 1.5 mm
2
1. Die Drähte entsprechend dem Verdrahtungsplan anschließen.
2. Für den Anschluss der Kamera sind nur 2 Drähte für sämtliche Funktionen erforderlich: Klingel,
Video, Sprechanlage und die Steuerungen zum Öffnen der Tür (Türöffner und automatische Tür-
oder Toröffnung).
Bitte beachten Sie die Polarität zwischen Display und Außen-Kamera
(zur Bedienung der Türöffner ist die Beachtung der Polarität nicht erforderlich).
•
Klemme
“6”
des Displays auf der Klemme
“6”
der Kamera.
•
Klemme
“7”
des Displays auf der Klemme
“7”
der Kamera.
v
orsicHt
: d
ie
d
räHte
dürfen
auf
keinen
f
all
(
zur
e
rHöHung
des
Q
uerscHnitts
)
verdoppelt
werden
.
a. Installation der Außenstation (Außen-Kamera)
Use the following wires: • lengths up to 25 metres: 2 x 6/10 wires
• lengths between 25 and 100 metres: 2 x 1.5 mm
2
wires1.
1. Connect the wires securely following the wiring diagram below.
2. To connect the video camera, only 2 wires are needed for all the functions: chime, video image,
intercom and opening commands (lock and automatic control).
Ensure that the colour coding of the wires is maintained when connecting the screen and the outdoor
video camera (no colour coding necessary for door-opening controls).
•
Terminal
“6”
on the screen to terminal
“6”
of the video camera.
•
Terminal
“7”
on the screen to terminal
“7”
of the video camera.
c
aution
:
under
no
circuMstances
sHould
tHe
wires
be
doubled
to
Make
tHeM
tHicker
a. Connecting the videophone
Cavi da utilizzare:
• 2 cavi 6 /10 fino a 25 m
• 2 cavi 1.5 mm
2
da 25 a 100 m
1. Collegare correttamente i cavi rispettando lo schema di cablaggio.
2. Per collegare la telecamera, sono necessari solo 2 cavi per tutte le funzioni: suoneria, immagine
video, citofono, comandi d’apertura (incontro e automazione.)
a
ttenzione
:
non
bisogna
in
nessun
caso
raddoppiare
i
cavi
per
auMentare
la
sezione
.
a. Collegamento del videocitofono
Summary of Contents for VPMN 252
Page 31: ......