UM200-en-GB_V1.5 2/17
3
Meter Description
Front Panel
1.
LCD:
6000 count LCD with Backlight.
2.
▲
button:
In SETUP mode, press the
▲
button to increment value by 1. Press and hold the
▲
button for over 2 seconds to increment value swiftly. In Recall mode, press the
▲
button to
display the next stored data location.
3.
SELECT button:
In SETUP mode press the
SELECT
button to select HI (Limit) or LO (Limit)
or display cable resistance per foot or meter
4.
▼
button:
In SETUP mode, press the
▼
button to decrement value by 1. Press and hold the
▼
button for over 2 seconds to decrement value swiftly. In Recall mode, press the
▼
button to
display the previously stored data data location)
5.
ZERO / RECALL button:
In resistance mode, zero the range before making measurements.
Press the
ZERO / RECALL
button to enter Relative mode (the present readings will be reset to
zero), or press the
ZERO / RECALL
button for over 2 seconds to exit the Relative mode. In
SETUP mode, use this button to recall the pre-stored sets of HI limits, LO limits and resistance
per unit.
6.
START / STOP button:
In resistance mode, press the
START / STOP
button to start
measurement. Press the
START / STOP
button again to stop and hold the reading.
7.
REC / READ button:
In measurement mode, press the
REC / READ
button to display the
number of the present recorded data and have the present reading recorded. In SETUP mode,
press the
REC / READ
button to enter READ data mode. Press it again to exit READ data
mode. In the READ mode, users can recall data stored by pressing the
▲
or
▼
button.
8.
FEET / METERS button:
In cable length mode, press the
FEET / METERS
button to select
units of Meter (M) or Feet (FT).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
