Extech Instruments MS6060, User Manual, Page: 63 / 87

63 MS6000-EU-EN-V1.3 7/12
Making a Continuity Measurement
To perform a Continuity test, perform the following:
1) Press the

)
)
)
key; the

)
)
)
indictor appears at the top of the screen.
2) Insert the black lead into the COM banana jack input and the red lead into the V/ Ω /C
banana jack input.
3) Connect the red and black leads to the test points. If the resistance value of the tested
points is less than 30
Ω
, a beep will sound from the test tool. The screen will resemble the
image in figure 7-4.
Figure 7-4 Continuity Measurement
www.burntec.com