background image

PH100-PH110   Version 5.0  06/05 

 

Support line (781) 890-7440 

Technical support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice 

For the latest version of this User’s Guide, Software updates, and other 

Up-to-the-minute product information, visit our website: www.extech.com 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and 

workmanship for one year from date of shipment (a six month limited warranty applies on sensors and 

cables). If it should become necessary to return the instrument for service during or beyond the warranty 

period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our 

website at www.extech.com  (click on ‘Contact Extech’ and go to ‘Service Department’ to request an RA 

number). A Return Authorization (RA) number must be issued before any product is returned to Extech. The 

sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in 

transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper 

wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. 

Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and 

will not be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited 

to repair or replacement of the product. The warranty set forth above is inclusive and no other warranty, 

whether written or oral, is expressed or implied. 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

Copyright 

©

 2005 Extech Instruments Corporation. 

All rights reserved including the right of reproduction in whole or in part in any form. 

Summary of Contents for ExStik PH100









Reviews: