DT200-EU-EN-V2.0 4/12
8
Storing and Recalling Readings
The DT200 stores up to twenty (10) readings in memory for later recall.
1.
Take a reading as previously described.
2.
With the reading displayed, press the
button.
3.
The reading will be stored in location 1.
4.
Take another reading press the store button. This new reading will be stored in location 1 and
the previous reading from location 1 will be moved to location 2.
5.
When all twenty locations have been filled the meter begins overwriting the existing readings.
6.
The memory location number is indicated on the upper left hand area of the display (1 to 20).
7.
Use the + and – bottons to scroll through the the stored readings.
8.
To clear all readings, enter the memory mode using the Memory button
and then press
and hold the CLR and the Memory buttons until the displayed memory location reading value
switches to zeros.
