1.2.2 Charging the Battery
Plug battery charger adaptor output cable into the battery charger connector as shown
in Figure 3.
FIGURE 3 – BATTERY CHARGER
Plug battery charger adaptor into the appropriate AC line voltage socket.
The Yellow/Amber charging LED will illuminate indicating that the battery is being
charged
The battery will be fast charged and after about 180 minutes. The LED will turn off
To remove the battery cartridge, open the battery door and tip the battery out of the
printer
.
Note: To ensure a full charge do not operate the printer while charging.
Note: The wall mounted charger is a Class II equipment (
)
. Multiple plug configurations
comply with most international standards. The wall mounted charger is not supplied with
plugs for use in Korea
Model
ANDES 3
Input Voltage/Current
100-240 VAC/0.4A
Input Frequency
47-63 Hz
Output Voltage/Current (
)
10VDC/1.32A
ANDES3 User’s Guide
Rev 1.0
8
