5.3 Regulatory Notes
5.3.1 FCC Part 15 Class B
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For Bluetooth equipped printers, please note:
The printer contains an OEM Serial Port Adapter from connectBlue with FCC ID:
PVH070101. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including
interference that may cause undesired operation.”
5.3.2 Warranty
This printer is warranted by Extech Instruments to be free of defects in parts and
workmanship for a period of one year from date of shipment. This warranty does not apply
to defects resulting from action of the user such as misuse, improper wiring, operation
outside of specification, improper maintenance or repair, or unauthorized modification.
Extech specifically disclaims any implied warranties of merchantability or fitness for a specific
purpose and will not be liable for any direct, indirect, special, incidental or consequential
damages. Extech’s total liability is limited to the repair or replacement of the product. The
warranty set forth above is inclusive and no other warranty, whether written or oral is
expressed or implied.
5.3.3 Warranty and/or Repair Service
A Return Authorization number must be issued before a unit is returned to Extech for repair.
Once a unit has been properly returned to Extech (Note: The customer is responsible for
ensuring proper packing to prevent damage in transit as well as the shipping costs back to
Extech), it will be repaired (estimates are provided first if the repair cost is estimated above
$100.00) and returned via UPS ground. The customer may elect a faster mode of transport
at their cost.
ANDES3 User’s Guide
Rev 1.0
30
