381295 381295-220 V1.3 5/06
14
Product Description
In this section, the LCD, front panel buttons, controls and terminals are described.
LCD Area
The screen is divided into five areas: INDICATOR, READING, WAVEFORM,
SETTING and MENU areas. Refer to the Figure below.
[LCD Display]
1) Indicator
▪
HOLD: Freezes displayed reading
▪
REMOTE: RS-232 PC interface indicator
▪
BACKLIGHT(
): Backlight indicator
▪
Charging LINE(
): Charging Battery indicator
▪
BATTERY(
): Low battery indicator
▪
BUZZER(
): Buzzer indicator
2) Primary Numerical Field (DMM Function): Displays numerical readings
3) Trigger selection: Channel A, B and External
3-1) Trigger level indicator
3-2) Trigger Cursor
4) Trigger Slope: Rising or Falling edge
5) Trigger mode: Normal or AUTO
6) Channel mode status
Verticle mode: CHA, CHB, A&B
Horizontal mode: Normal, Roll
7) Memory Address: 0 to 15
8) Live Scope Display (Channel A): Displays real time waveforms and freezes held
captures.
9) Channel B
10) Channel A Vertical Division
11) Channel B Vertical Division
12) Horizontal Division (Time base)
13) Command Menu Field