manualshive.com logo in svg

Extech Instruments 380947, User Manual, Page: 7 / 7

Share
Download
Extech Instruments 380947 User Manual Download Page 7

380947   V3.0V    10/06

 

7 

 

Support Hotline (781) 890-7440 

Tech support: Ext. 200; Email: [email protected] 

Repair/Returns: Ext. 210; Email: [email protected] 

Website: www.extech.com 

Battery Replacement 

1.  When the low battery symbol appears on the LCD, the batteries must be replaced.  

2.  Turn the meter off and remove the rear battery compartment screw. 

3.  Lift off the battery compartment cover and replace the two 1.5V AA cells. 

4.  Replace the compartment cover and secure the screw. 

Cleaning 

Use only a dry cloth to clean the plastic case. 

 
 

 

Calibration and Repair Services 

Extech offers repair and calibration services for the products we sell. Extech also provides 
NIST certification for most products. Call the Customer Service Department for information 
on calibration services available for this product. Extech recommends that annual 
calibrations be performed to verify meter performance and accuracy. 
 

 
 
 
 
 
 
 
 
 

 

Copyright 

©

 2006 Extech Instruments Corporation 

All rights reserved including the right of reproduction in whole or in part in any form. 

 
 
 

 

www.burntec.com

Summary of Contents for 380947








Reviews:

No comments