20
USE OF THE APPLIANCE
Display
Display
Designation
Function
0
Zero
The heating zone is activated
1…9
Power level
Selection of the cooking level
A
Heat accelerator
Automatic cooking
E
Error message
Electronic failure
H
Residual heat
The heating zone is hot
L
Locking
The Control panel is locking
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which
risks causing blue-tinted color on the glass surface.
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a control
light, a letter or a number in the display and/or a “beep” sound.
Touch only one key on the same time.
Starting-up
Start-up/ switch off the hob
Action
Control panel
Display
To start:
touch key [
]
[ 0 ]
To stop:
touch key [
]
nothing or [ H ]
Start-up/ switch off a heating zone
Action
Control panel
Display
Increase power
touch key [ + ]
[ 4 ] to [ 9 ]
Decrease power
touch key [ - ]
[ 9 ] to [ 1 ]
Stop
touch simultaneous [ + ] and [ - ]
[ 0 ] or [ H ]
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
