1.5
SAFETY WARNING
IMPORTANT
ALWAYS READ THE USER MANUAL BEFORE OPERATION.
PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE
PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR
AREA.
This product must be installed by a qualified professional.
Always operate the equipment as described in the user manual.
A minimum distance of 0.5m must be maintained between the
equipment and combustible surface.
The product must always be placed in a well ventilated area.
Always make sure that the equipment is installed securely.
DO NOT stand close to the equipment and stare directly into the LED
light source.
Always disconnect the power supply before attempting and
maintenance.
Always make sure that the supporting structure is solid and can
support the combined weight of the products.
The earth wire must always be connected to the ground.
Do not touch the power cables if your hands are wet.
ATTENTION
This product left the place of manufacture in perfect
condition. In order to maintain this condition and for safe
operation, the user must always follow the instructions and
safety warnings described in this user manual.
Avoid shaking or strong impacts to any part of the equipment.
Make sure that all parts of the equipment are kept clean and
free of dust.
Always make sure that the power connections are connected
correct and secure.
If there is any malfunction of the equipment, contact your
distributor immediately.
When transferring the product, it is advisable to use the
original packaging in which the product left the factory.
Shields, lenses or ultraviolet screens shall be changed if
they have become damaged to such an extent that their
effectiveness is impaired.
The lamp (LED) shall be changed if it has become damaged
or thermally deformed.
1 PRODUCT(GENERAL)
4
2009.12.9
4.1
BASIC ADDRESSING
Connect all of the units in series using standard DMX512 signal
cable or the IP65 rated cable provided.
Set the DMX512 address in the
DMX
menu.
4.2
CHANNEL ASSIGNMENT
13
4 USING A DMX512 CONTROLLER
Note: This product have three DMX512 channel configuration:
STAGE 1
,
ARC 1
and
ARC 1+D
1
2
0
255
3
4
0
255
0
255
0
255
5
0
10
11
35
36
60
61
85
86
110
111
135
136
160
161
185
186
210
211
215
216
220
221
225
226
230
231
235
236
240
241
245
246
250
251
255
RED 100% / GREEN UP / BLUE 0%
RED DOWN / GREEN 100% / BLUE 0%
RED 0% / GREEN 100% / BLUE UP
RED 0% / GREEN DOWN / BLUE 100%
RED UP / GREEN 0% / BLUE 100%
RED 100% / GREEN 0% / BLUE DOWN
RED 100% / GREEN UP / BLUE UP
RED DOWN / GREEN DOWN / BLUE 100%
WHITE 1: 3200K
WHITE 2: 3400K
WHITE 3: 4200K
WHITE 4: 4900K
WHITE 5: 5600K
WHITE 6: 5900K
WHITE 7: 6500K
WHITE 8: 7200K
WHITE 9: 8500K
MARCO
No function
Ch2 will control the TIME if Ch7 choose custom01-10
DIMMER
Ch3 will control the FADE if Ch7 choose CUSTOM01-10
STAGE 1
BLUE
CHANNEL
FUNCTION
VALUE
GREEN
RED
6
0
10
11
255
Strobe speed
STROBE
No function
4
USING A DMX512 CONTROLLER
2009.12.9
