1.1
PRODUCT INTRODUCTION
This product is designed for indoor use. Suitable applications include
wash or effect lighting for architectural, stage or nightclub applications.
This product can also be installed for use in signage and advertising
using the dynamic functions available with DMX512 control. Direct input
of DMX512 signal allows the units to be controlled from any DMX512
controller. This product can be operated as a single unit or in multiple
units for large applications.
The specially developed controller that allows the product to be
controlled independent of the DMX512 controller enables the user to
create and edit a wide range of custom programs. All programs can be
touch-button displayed or scheduled to START and END at scheduled
times. When programs have been created or edited in the controller, it is
also possible to trigger these programs using the DMX IN function when
connected to a DMX512 controller.
1.2
PRODUCT FEATURES
LED FIXTURE
* RGB Dimmer 0-100%
* Strobe
* Automatic programs
* LCD display
* Display control 'lock-out'
* Direct DMX512 input
* Independant ID address
* Stand-alone/ Slave
1 PRODUCT(GENERAL)
1
1
PRODUCT (GENERAL)
2009.12.9
4.3
BASIC INSTRUCTIONS FOR DMX512
OPERATION (STAGE 1)
MASTER DIMMER
CH1 controls the intensity of the currently projected color
When the slider is at the highest position (255) the intensity of the output
is the maximum
RED, GREEN & BLUE COLOR SELECTION
CH2, CH3 & CH4 control the intensity ratio of each of the RED, GREEN &
BLUE LEDs.
When the slider is at the highest position (255) the intensity of the color is
the maximum.
CH2, CH3 & CH4 can be combined together to create over 16 million
colors.
COLOR MACROS
CH5 selects the required COLOR MACRO
CH5 has priority over CH2, CH3 , CH4 and CH6
CH1 is used to control the intensity of the COLOR MACRO
STROBE
CH 6 controls the strobe of CH1 to Ch5
ID ADDRESS SELECTION
CH9 is used to select the target ID address.
Each independent DMX address may have upto 66 independent ID
addresses.
An ID address of 0 will activate all ID address locations.
AUTO
CH7 selects the preset AUTO programs AT.01-AT10 or the custom AUTO
programs PR.C1-PR.10
When activating the custom AUTO programs PR.C1 to PR.10 then it is
possible to control the
Step time and fade time using Ch2 and Ch3 respectively.
16
4 USING A DMX512 CONTROLLER
2009.12.9
