Exploranium KT-9, User Manual, Page: 65 / 88

57
KAPPA
1
—simple data transfer
This is a simple program that demonstrates how data is
transferred from the KT-9 to the computer.
There is no remote control of the KT-9 from the computer in
this program.
The data are displayed on the computer screen only and not
stored.
SCAN 7C
— PC recording of data from a
manually operated KT-9
This program allows you to digitally record the data on a PC
from a manually operated KT-9. The KT-9 may be operated in
either the P
IN
or N
O
-P
IN
modes.
S
CAN7C
has detailed on-screen instructions to guide you, starting
from the connection of the KT-9 to the RS-232 port all the way
through to the opening and closing of the data files. A brief
overview of the process is as follows.
1 Connect the supplied cable (Part no. 97945) to the KT-9
computer port located on the bottom panel (covering the
battery compartment).
2 Connect the other end of the cable to the
COM
1:
serial port
of your computer. Please note that the cable has a DB-9
connector. If your computer has a 25-pin port, you will
either need a DB-9 to DB-25 adaptor or ask
EXPLORANIUM
for a special DB-25 version of the connector cable.
3 Run the S
CAN7C
program on your computer.
4 The display prompts ask you to:
57
KAPPA
1
—simple data transfer
This is a simple program that demonstrates how data is
transferred from the KT-9 to the computer.
There is no remote control of the KT-9 from the computer in
this program.
The data are displayed on the computer screen only and not
stored.
SCAN 7C
— PC recording of data from a
manually operated KT-9
This program allows you to digitally record the data on a PC
from a manually operated KT-9. The KT-9 may be operated in
either the P
IN
or N
O
-P
IN
modes.
S
CAN7C
has detailed on-screen instructions to guide you, starting
from the connection of the KT-9 to the RS-232 port all the way
through to the opening and closing of the data files. A brief
overview of the process is as follows.
1 Connect the supplied cable (Part no. 97945) to the KT-9
computer port located on the bottom panel (covering the
battery compartment).
2 Connect the other end of the cable to the
COM
1:
serial port
of your computer. Please note that the cable has a DB-9
connector. If your computer has a 25-pin port, you will
either need a DB-9 to DB-25 adaptor or ask
EXPLORANIUM
for a special DB-25 version of the connector cable.
3 Run the S
CAN7C
program on your computer.
4 The display prompts ask you to: