Expert RF600, Instruction Manual

Page: 12 / 20

1 2 EXPERT Manual
S E RVO REVERSING/SETTING REVERSING SWITCHES
After radio installation, it is imperative that the proper servo/control
system direction be established. Servo reversing allows you to alter the
direction of the servo/control surface movement to match the direction of the transmitter stick. Please refer to the chart in the following section
below to determine the proper control surface direction.
1. Connect all control linkages and check to see that all servos
move freely.
2. While standing directly behind the airplane, go through the steps
shown in the charts below to check proper direction of the
control surface.
3. Using the Servo Reversing Switches located on the front of the
transmitter, adjust the direction of each servo as necessary for
proper operation.
9.2
Carburetor
Low (Idle)
High (Full)
Left
Rudder
Full Throttle Down Elevator
Right
Aileron
Up Elevator
Left
Aileron
Idle
Right
Rudder
1/16"
Elevator
Aileron Up
Rudder
Aileron Down
Full Throttle
Left
Rudder
Idle
Right
Rudder
Down Elevator
Right
Aileron
Left
Aileron
Up Elevator
Up Elevator
Throttle Right Aileron
Right Rudder
Servo Reversing Switches
Rudder Elevator Aileron Throttle