EXPERT GRILL Commodore, Owner'S Manual

Page: 27 / 30

- 25 -
“ErL”

Insufficient or
poor pellets

Check and remove fire pot ash
build-up, obstructions and that
it is seated properly in the
firebox.

Ensure igniter is heating up and
positioned correctly.

Check fans to confirm operation
and speed.

Ensure hopper has sufficient
standard pellets.

Press "Prime" or put a small
amount of pellets into fire pot.
Problem Cause Solution
Igniter does
not work

Insufficient
air flow

Check and remove fire pot ash
build-up, obstructions and that it is
seated properly in the firebox.

Igniter rod
is not work

Check to confirm igniter DOES
NOT get hot. When you check it,
DO NOT TOUCH the igniter or
the housing, you may will get
burnt.

Check on placement of the igniter
rod to the fire pot.

Cut off the power, remove
baseboard of hopper, ensure wire
connectors are tight.
Produces
excess
or discolored
smoke

Excess
grease
build-up

Check and clean the interior
grilling area.

It is a good practice to clean and do
a controlled burn off the hidden
excess grease after each large
cooking of tasty greasy foods.

Pellets wet

Check and clear the hopper and
fire pot of moist pellets, replacing
them with fresh dry pellets.

Excess
pellets

Check and remove excess pellets in
the hopper.