EXPERT GRILL Commodore, Owner'S Manual

Page: 26 / 30

- 24 -
Troubleshooting
WARNING
：
Before troubleshooting, make sure the power is turn off, the grill in turn off.
Problem Cause Solution
PID Screen
Not Turn ON

Grill is not
properly plugged
in.

Ensure all wire connections are
firmly connected.

Ensure grill is plugged into a
working GFCI outlet.

The circuit board
fuse has been
tripped.

Fuse must be manually replaced.

The GFCI outlet
has been tripped.

Ensure all wire connections are
firmly connected and dry.

Ensure GFCI is a minimum 10
Amp service.
“Err” and Fan icon
is flashing

Fan not plugged
in or damage

Ensure Fan wire is connected
correctly to PID screen.

Confirm wire connections and
replace if has any damage.
“Err” and Igniter
icon is flashing

Igniter not
plugged in or
damage

Ensure Igniter wire is connected
correctly to PID screen.

Confirm wire connections and
replace if has any damage.
“Err” and Auger
icon is flashing

Auger not
plugged in or
damage

Ensure Auger wire is connected
correctly to PID screen.

Confirm wire connections and
replace if has any damage.
“ErH” 
The grill has
overheated, due
to grease fire or
excess pellets.

Turn the grill off and allow to
cool.

Clean grill interior, remove excess
pellets
“ErP”

Thermal probe
not plugged in
or damage

Thermal probe not being used.

Ensure thermal probe wire is
connected correctly to PID screen.

Confirm wire connections and
replace if has any damage.