Copyright © 2014 EXOR International S.p.A. All Rights Reserved.
25
Chapter 3: System Setup
eTOP-MON 1200T/1205T/1500T/1700T/1900T User Manual
C
HAPTER
3: S
YSTEM
S
ETUP
Panel Mounting
1. Select a place on the panel where you will mount the Industrial Touch
Monitor.
2. Cut out a shape on the panel that corresponds to the Industrial Touch
Monitor’s rear dimensions.
The thickness of the panel (e.g. steel board, plank, acrylic board, wall,
etc.) where you will mount the Industrial Touch Monitor must not
exceed 3mm for eTOP-MON 1500T/1900T and 4mm for eTOP-MON
1200T/1205T/1700T. If the distance between the front bezel and panel
mount hole is too wide, it will not fit the panel mount kit.
304.50
4.00mm
230.00
371.00
3.00mm
297.00
eTOP-MON 1200T/1205T
eTOP-MON 1500T
