Ion Power DAC
User Guide
11
Note
:
Whenever you select the Ion as the Comet’s output, it will
always be in Mute mode. This is a
protective measure because a PowerDAC is controlling power directly, unlike a traditional
amplifier that simply modulates it. This is a mechanism that protects your speakers from any
potential DC spikes and possible damage.
You can exit the Mute m
ode by either touching Volume Up or the Mute button on the EXOGAL Comet’s
remote control or the Comet application on your mobile device. Select the volume level of your choice
using the Comet remote control
’s volume buttons
or the EXOGAL smartphone application.
You can reenter Mute mode by pressing the Mute key on the remote or the application. The Ion
supports the Comet’s
half-mute and full-mute modes.
Other LED Flash Modes
The Ion can give you a tremendous amount of information via the multicolor LED. For example:
Errors
If the Ion detects an overload (such as a short) or an over temperature condition The LED will
rapidly flash Amber alerting you to a condition that requires immediate attention.
If the LED is slowly flashing Red, it means the Ion has encountered an error and has put itself
into Protect Mode. This could be due to a correctable measure (such as an output that has been
shorted for a long time) or it could indicate a failure inside the Ion.
If the LED is a solid Red, the Ion has encountered an internal error and you should speak with
your dealer for further guidance and any possible service.
