8
| UK
Your energy.
Optimized.
Warranty
All Exodraft products are covered by a 2-year guarantee as per European consumer rights legislation. For
some countries an extended period of guarantee may apply depending on either national legislation or
other clearly stipulated conditions. Customer c
omplaints must be handled by a specialised dealer or
wholesaler (preferably where the Exodraft product has been bought originally). An updated list of Exodraft
specialised dealers can be found on our website for the country in question.
Exodraft products must always be installed by properly qualified personnel. Exodraft reserves the right to
change these guidelines without prior notice.
The warranty and liability does not cover instances regarding personal injury or damage to property or the
product that can be ascribed to one or more of the following causes:
•
Failure to follow this installation and operation manual
•
Incorrect installation, start-up, maintenance or servicing
• Improper repairs
•
Unauthorised structural modifications made to the product
•
Installation of additional components that have not been tested/approved with the product
• Any damage resulting from continued use of the product despite an evident defect
• Failure to use original spareparts and accessories
• Failure to use the product as intended
•
Exceeding or failure to meet the limit values in the technical data
•
Force majeure
Technical specifications
The Exodraft chimney fan type RSG gives a downward discharge of the flue gases through secure grilles on
the underside of the fan housing. It is made from galvanised sheet metal, fitted with a centrifugal impeller.
Chimney fan
Axial vane
RSG125-41
RSG150-41
RSG200-41
Stainless steel centrifugal impeller
RSGC150-41
Stainless steel centrifugal impeller
The air flow sensors are linked to a pressure differential switch (PDS), ensuring correct airflow when the
appliance is used. The fan unit is supplied with a 6 core heat resistant silicone cable, which is 3 metres long
(RSG) or 4 metres long (RSGC).
The chimney fan is designed to operate with a flue gas temperature min. -20 °C to max. +180 °C,
and an ambient temperature min. -20 °C to max. +40 °C
ATTENTION! The fan should be installed on a suitable external wall and its installation must be
in accordance with all necessary servicing, environmental and regulatory building regulations, BS
Standards, local bylaws and legal requirements