UK |
13
3112007_RSG_UK
Mechanical installation
Exodraft products must always be installed by properly qualified personnel and according to the
manufacturer’s instructions.
Location of the fan
In the case of a room without a chimney, decide the final location of the appliance. Check that the fan posi-
tion on the external wall is acceptable. Mark the centre of the flue exit on the internal wall. Use this centre
to make cutting lines for the flue pipe or silencer using dimensions for fan RSG150 and 200 as applicable.
The hole through the wall should provide minimum 5 mm clearance between the wall and the flue pipe or
silencer. Drill and cut through the internal and the external wall.