Hermiankatu 6–8, 33720 Tampere | +358 10 773 5400 | [email protected] |
MANUAL
Loop 1
Loop 2
Dry contact output
Internal wiring
External control loop 2 dry
contact
External control loop 1 dry
contact
Battery
connector
Swith K3: Filter
ON/OFF (default
ON). If panel is to
be connected to
earlier generation
of ESC-200P set
filter OFF.
Jumpers X317 and
X318: Do not change.
By default they are
connected and enable
communication on line.
Trimmers R33 and R34:
Line output power. By
default same as
luminaire powers. Do
not change without
contacting supplier.
