ORCA-50 UHF Demo Manual V1.0
19 Eximia Srl
–
www.eximia.it
- www.rfidstore.it
setting.
After setting, the state of the buzzer will keep the FLASH inside and outside the reader, after the power
is not lost
。
2.
Develop your own RFID application
Users can use the demo program to operate most of the functions of the reader, but in the actual
application environment, it is necessary to develop the user's own program
。
The accompanying documentation: UHF_RFID serial interface communication protocol _V2.38.pdf
provides a complete interface for operating the reader.
This interface is based on serial communication, so regardless of the user's physical interface is RS - 232
or TCP / IP, the reader is to follow the definition of this interface
。
Demonstration program provides an important function is the serial port transmission records, the user
with the communication protocol documentation and demo program operation process of the actual serial
data to compare, you can quickly grasp the contents of the communication protocol
。
Select the lower right corner of the open serial port monitoring check box, all the uplink and downlink
serial data will be recorded, as shown below (open the serial port monitoring, the software response speed
will slow down, so usually should close the serial port monitoring.
：
