ORCA-50 UHF Demo Manual V1.0
13 Eximia Srl
–
www.eximia.it
- www.rfidstore.it
The process of accessing a tag is actually divided into two steps, first by disk, and then accessed. The
above prompt indicates that the label is successful, but the access operation is not possible
。
In general, there are two reasons for this problem, one is the parameter settings are wrong, such as
reading does not exist in the storage area, another reason is that the RF energy is not enough, access to the
operating distance of the label is about the disk operating distance 60% to 70%, so if this is the case, please
move the label closer to the antenna
。
◆
Access password is wrong
：
The cause of this problem, as described in the prompt, is that the access password is set incorrectly
。
◆
There is no operational label error
：
There are no labels available for operation in the RF area
。
The meaning of the other return information, the user can refer to the document
：
UHF_RFID serial interface
communication protocol _V2.38.pdf
