![background image](http://html1.mh-extra.com/html/exibel/38-5480/38-5480_manual_2450287006.webp)
6
En
gl
is
h
-
5. Screw the wall bracket to
the wall. The screw in
the middle needs no washer.
Masonry wall
-
1-2. Measure, mark out and drill
pilot holes. Use a hammer drill.
-
3. Drill the mounting holes 60 mm
deep using a Ø 10 mm (3/8
″
)
drill bit.
Note:
The arrow on
the wall bracket should point
upwards so that the 2 screws are
in the top of the bracket.
-
4. Screw the wall bracket to the wall.
The screw in the middle needs
no washer.
Important:
The holes
must be at least as deep as
the length of the screws.
3. Refit the screw head covers.
Summary of Contents for 38-5480
Page 2: ...2 ...