EXFO XTM-50 O-band, User Manual

Page: 43 / 68

Using the XTA-50 in Remote Mode
XTA-50 User Guide 43
5.6 Controlling the XTA-50 Graphical Interface from an
External Screen
Subject You can connect an external screen to the XTA-50 to display and control the graphical
interface.
Before Starting • Make sure you have a DVI cable to link the XTA-50 to your external screen.
• If the screen you want to connect is not a touch screen, make sure you have a mouse
to be able to control the XTA-50 graphical interface.
Procedure 1. Connect your external screen to the DVI port located on the rear panel of the XTA-50
(see
Figure 2, p. 13 ).
The XTA-50 graphical interface immediately appears on the external screen, and is
no longer displayed on the XTA-50 screen.
2. Do one of the following, depending on the type of screen you have connected:
• If you have connected a touchscreen, you can control the graphical interface by
using touch screen gestures.
• If your screen is not a touch screen, connect a mouse to one of the USB-A or PS/
2 port located on the XTA-50 rear panel (see
Figure 2, p. 13 ) to control the
graphical interface.
3. To stop the remote display, disconnect the DVI cable from the XTA-50.