Setting the Wavelength/Frequency and FWHM Values
XTA-50 User Guide
29
•
Wavelength
/
Frequency
•
FWHM
•
Delay
: period of time between instruction execution (in seconds).
Possible value: 0.1 to 100 seconds.
4.3.2
Running a Sequence
Subject
The XTA-50 provides two ways to execute a sequence:
•
Executing a single run of the listed instructions
•
Executing the listed instructions continuously.
Before Starting
In the
Sequence Editor
window, display the list of instructions you want to execute by
creating (see section
) or loading (see section
) a sequence.
Procedure
Executing a Single Run
1.
In the
Sequence Editor
window, touch the
button.
The
Running Single Sequence
window appears.
Figure 14: Sequence - Single Run
2.
Select the sequence execution mode by touching one of the following buttons:
•
Automatic
: the entire sequence is automatically executed.
•
Manual
: this mode enables you to execute the sequence step by step. The first
instruction is executed and the sequence execution stops until you touch the
Next
button.
3.
Touch the
Start
button to begin the sequence execution.
•
To stop the sequence execution touch the
button.
•
In Manual execution mode, the first instruction is executed. Touch the
Next
button to execute the following instruction.
4.
To go back to the
Sequence Editor
page, touch the
button.
Summary of Contents for XTM-50 O-band
