Product Presentation
10
XTA-50 User Guide
Interfaces &
Electrical
Specifications
*4: Between -3 and -40 dB. Typically 550 dB/nm @ FWHM = 50 pm, 450 dB/nm @ FWHM= 1 nm, 225 dB/nm
@ FWHM = 5 nm.
*5: From 1500 to 1600 nm & FWHM >100 pm.
*6: At lowest FWHM the insertion loss is 7 dB typical.
*7: From 1500 to 1600 nm & FWHM >60 pm.
*8: From 1280 to 1340 nm & FWHM >100 pm.
*9: For FWHM >100 pm.
*10: At lowest FWHM the insertion loss is < 7.0 dB.
*11: Centered width of FWHM - 150 pm. For 150 pm < FWHM < 650 pm.
*12: Centered width of FWHM - 100 pm. For 100 pm < FWHM < 500 pm.
*13: From 1280 to 1340 nm.
*14: Centered width of FWHM - 150 pm. For 150 pm < FWHM < 2000 pm.
*15: Measured 1 nm away from the -3 dB points.
Standard
Ultrafine
O-band
Wide
Optical Interfaces
Optical Connector
FC/PC or FC/APC
Optical Fiber Type
SMF or PMF
SMF
Remote Interfaces
Ethernet RJ45 (x2)
1 Gb/s max
IEEE 488.2 (GPIB)
Accessory (only available with a GPIB/RS-232 converter)
USB-B
115 kb/s max.
Serial ports (x2)
COM1: unused
COM2 (RS-232C): 9.6 kb/s
External Devices
External Display
DVI-I (Digital) port (x1): res. 1920x1200 max
Mouse, keyboard
USB-A (x4), PS/2 (x2)
Electrical Specifications
Unit
Input Power
XTA-50 turned on: 12 V
, 2.8 A
XTA-50 turned off (power switch set to
I
): 12 V
, 0.16 A
Fuse Type
4 A Fast-acting, Low-breaking, 250 V, Ø5x20 mm
Internal clock battery
3V CR2032 (replacement by service personnel only)
AC/DC
Adapter
Input Power
100–240 V
, 50–60 Hz, 2.0 A rms
Output power
12 V ,
100 W
All specifications are given at 21°± 3°C after 30 minutes warm-up.
Summary of Contents for XTM-50 O-band
