Page 21 of 50
6) Double click on SETUP.EXE
7) Follow the setup instructions as they appear by
clicking “next” each time the user prompt appears,
until the installation has been completed and “finish”
appears. Click on “finish” to complete the
installation.
8)
To access the control panel software program, click
on the Windows Start menu and select: programs/
EXFO
►
/ R2000 Control Panel. A screen with a title
bar displaying “R2000 Control Panel” will appear.
Click on Connect at the top of the screen. The R2000
Control Panel will open when there is a successful
connection. This should take no more than a few
seconds.
As long as there is a connection between the PC and the
Radiometer, data is automatically downloaded to the PC.
A 9-pin serial cable is provided with each R2000
Radiometer.
If a problem connecting occurs, a ‘No response from
radiometer….’ Error may be displayed. If this occurs
click ‘OK’ and check the R2000 Radiometer. Press the
ON keypad button as necessary and try connecting
again.
