Page 15 of 50
Radiometer. External radiometer devices are available
from EXFO Life Sciences & Industrial Division as custom
ordered items.
Press the EXTERNAL keypad button. The display will
show the EXT icon and a number (starting at 1), that
corresponds to the external radiometer sensor being
detected. This number is shown for a few seconds and
then the display shows the corresponding measurement
of that device.
If multiple devices are connected each press of the
EXTERNAL keypad button will increment to the next
external device before returning back to internal mode.
This is indicated on the display when the EXT icon is no
longer illuminated.
The measurement mode is dependent on the type of
sensor the external device has. For example, the R2000
Radiometer will only measure Irradiance when an
external radiometer device is only able to measure
Irradiance.
The Power mode becomes disabled and the display will
show a ‘Loc’ message if the user tries to toggle into
Power mode.
The same is true for sensors that measure only Power;
the Irradiance mode will not be accessible and the
display with show a ‘Loc’ message.
