EXFO FTB-200 User Manual Download

Page: 199 / 222

Troubleshooting

Compact Modular Platform

189

Solving Common Problems

The 3G USB modem key

is connected, but you

are not able to access

the Internet.



There is no SIM

card in the USB

modem key.

Insert the SIM card into the USB

modem key. For complete

instructions, refer to the

documentation that came with your

modem key.



The FTB-200 v2

unit is not up to

date.

Ensure that the latest System Upgrade

and Platform kits are installed on your

unit before connecting your USB

modem key. For more information,

see the

Accessing the Internet with a

3G USB Modem Key

section.



The USB modem

key is not detected

properly.

Disconnect the modem key from your

unit, and try connecting it again.
If the modem key is still not detected,

try connecting it to another USB port.



The SIM card has

not been activated

or there is a

problem with

service package

that you

purchased.



The SIM card is

locked.



There is a problem

with the mobile

network.

Contact your provider of mobile

services.

The GPS USB key is not

detected.

---

Disconnect the GPS key from your

unit, and try connecting it again.
If the GPS key is still not detected, try

connecting it to another USB port.

Problem

Cause

Solution

Summary of Contents for FTB-200































































































































































































































Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands

EXFO FTB-200, User Manual

Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands