EXFO FTB-200 User Manual Download

Page: 14 / 222

Introducing the FTB-200 v2 Compact Modular Platform

FTB-200 v2

LED Panel Description

LED Panel Description

The LED panel located on the front of the unit provides you with the status
of your unit.

Note:

The function of certain LEDs vary with the applications.

LED

Status

Meaning

Green

Unit is on.

Green, blinking

Unit is in Standby mode.

Off

Unit is off or in Hibernation mode.

Green

Battery is fully charged.

Green, blinking

Battery is charging.

Yellow

Unit is not powered by AC and battery is low.

Red

No battery in the unit or battery error.

Off

Unit is off or unit is not powered by AC and battery

level is above the “low-battery threshold”.

Bottom panel

Retaining screws

Summary of Contents for FTB-200































































































































































































































Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands

EXFO FTB-200, User Manual

Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands